SKU:HA-ALARM-BKT
Hilook HA-ALARM-BKT Wall/Ceiling mount
Login to buy0-90° vertical; ±40° horizontal; Wall/Ceiling mount
-
Vendor:
HiLook
- Description
Product Overview
Optimizing motion detection relies on accurate sensor orientation. The HA-ALARM-BKT Wall/Ceiling Mount Bracket gives installers total angular freedom to direct HiLook Pro wired detectors exactly where monitoring is required. Designed as a dedicated mounting accessory, it supports both wall and ceiling installations, eliminating fixed-mount limitations that leave entryway blind spots or room corners uncovered. Featuring a vertical tilt range from 0° to 90° and a horizontal swivel of ±40°, this bracket allows fine-tuned sensor alignment after base attachment. Built from durable ABS plastic with a clean white finish, it seamlessly fits residential and commercial settings without being visually obtrusive. Ideal for corridors, open office layouts, retail spaces, and commercial facilities where standard surface mounting falls short of providing optimal detection angles.
Key Capabilities
Vertical Tilt 0° to 90°
A broad 90-degree vertical tilt angle allows sensors to be aimed sharply downward from ceiling or high-wall mounts, directing the PIR lens toward movement zones rather than overhead space.
Horizontal Swivel ±40°
Offers a ±40° horizontal swivel for directional fine-tuning once fixed to a surface. This is particularly useful in corner setups where walls do not align with target detection paths.
Wall and Ceiling Compatible
Versatile mounting design accommodates both wall and ceiling placement across various architectural layouts, ideal for open spaces where wall setups miss cross-room motion.
ABS Plastic Construction
Robust ABS plastic body keeps mounting weight minimal while providing a firm, stable hold. The white aesthetic blends effortlessly into standard interior surfaces.
Best For
The ±40° horizontal swivel corrects for misaligned wall angles, making corner placement simple without moving existing wire runs.
The 0° to 90° tilt lets detectors point steeply toward the ground to track floor-level traffic across corridors or open areas.
Compensates for fixed cable entry locations by allowing complete sensor reorientation after installation.
Why Choose the HA-ALARM-BKT
Standard fixed-mount PIR sensors depend entirely on surface angles to set detection coverage, restricting sensor placement in open-plan interiors, long hallways, or locations dictated by existing wiring runs. The HA-ALARM-BKT Bracket eliminates this constraint by isolating sensor aiming from base mounting, offering 0° to 90° vertical tilt and ±40° horizontal swivel after the base is secured. This flexibility avoids the hassle of drilling new holes or re-routing cables when fine-tuning coverage angles. Engineered specifically for HiLook Pro wired sensors, it guarantees a firm, tailored fit rather than relying on loose universal mounts. Available through Total Security Equipment, the HA-ALARM-BKT is a practical accessory for technicians who demand dependable, flexible sensor positioning.
Buyer Decision Tips
Key Features & Technical Specifications
| Model | HA-ALARM-BKT |
| Mounting Type | Wall or Ceiling |
| Vertical Adjustment | 0° to 90° |
| Horizontal Adjustment | ±40° |
| Compatible Devices | HiLook Pro Wired Detectors |
| Material | Durable ABS Plastic |
| Colour | White |
Ideal Use Cases
Residential Corridors and Entryways
In hallway environments where cable outlets sit higher than ideal, the 0° to 90° tilt helps direct the sensor downward toward floor-level motion instead of beaming into empty space.
Retail & Office Layouts
Open retail floors benefit from ceiling-mounted detectors sweeping downward across wider spaces. Combining ceiling support with vertical tilt makes this effortless without specialized brackets.
Commercial Facilities
High ceilings in commercial spaces demand specific zone targeting. The HA-ALARM-BKT allows precise angular adjustment post-installation, eliminating multiple mounting attempts.
Retrofit System Upgrades
When updating legacy alarm systems where cabling is pre-set, the ±40° horizontal swivel corrects surface angle offsets to point sensors directly at target zones.
Choosing the Right Model
Choose this model if:
You are mounting HiLook Pro wired PIR detectors where wall or ceiling surfaces do not directly face the detection area, requiring up to 90° vertical tilt and ±40° horizontal swivel post-installation.
Choose a different model if:
Your PIR sensors are wireless, made by another manufacturer, or mounted flat against surfaces that already point directly toward the target zone without needing angular correction.
Frequently Asked Questions
Which detectors is the HA-ALARM-BKT compatible with?
The HA-ALARM-BKT is designed specifically for HiLook Pro wired sensors. Compatibility with wireless models or third-party brands is not guaranteed. Please verify your detector model prior to ordering.
Can the bracket be mounted on ceilings as well as walls?
Yes, it supports both wall and ceiling installations. Ceiling mounting is ideal for open environments where wall-mounted units might miss cross-room movements. The 0° to 90° vertical tilt enables a steep downward detection angle.
How much adjustment flexibility does the bracket offer?
It provides 0° to 90° vertical tilt and ±40° horizontal swivel. Adjustments are made after fixing the base, allowing precise aim fine-tuning without disturbing the mounting hardware.
What material is the bracket made from?
The bracket is crafted from lightweight, durable ABS plastic, offering structural stability and high impact resistance for interior security applications in a clean white finish.
Is this bracket suitable for off-axis corner installations?
Yes. The ±40° horizontal swivel is specifically designed to re-orient the sensor toward the target coverage area when mounted on walls that run off-angle. The HA-ALARM-BKT is available through Total Security Equipment for these tailored installation needs.
Additional Information
Melbourne HQ
26 Davies Ave., Sunshine North, VIC 3020
03 9079 5566
Sydney Branch
38 Lisbon St., Fairfield East, NSW 2165
02 8722 0348
Ordering & Support
- Australia-wide prompt shipping
- 100% genuine Dahua official stock with full local warranty
- Matching Dahua NVRs, junction boxes & brackets in stock
- Trade accounts and installer discounts available
- Professional technical guidance on camera positioning & network design
Need expert assistance choosing the right Dahua TiOC 180° camera or mounting hardware for your site? Contact our Melbourne team on 03 9079 5566 or Sydney on 02 8722 0348 for technical advice.
