SKU:PFS4226-24ET-240
Dahua 24-port 100 Mbps + 2-port Gigabit Managed PoE Switch - PFS4226-24ET-240
Login to buyThe full load is 240W. With all metal design, the product has good heat dissipation and low power consumption, which can work in environments from –10°C to +55°C. The product owns powerful network management functions. Network management system supports CLI, iLinksView, web and network management software based on SNMP.
Features
- Intelligent PoE
- Red port supports 90W IEEE802.3bt
- Web management with a friendly interface and easy operation
- 250 m long-distance PoE transmission
- PoE watchdog
- Plug and play
- Description
Product Overview
The Dahua PFS4226-24ET-240 is a 28-port Layer 2 managed PoE switch built for large CCTV and access-control installs that need real power headroom. Twenty-four Fast Ethernet ports supply PoE power, two of which support Hi-PoE for long-range PTZ cameras or high-draw devices, while 2 Gigabit RJ45 + 2 Gigabit SFP combo ports give you a flexible copper or fibre uplink back to your core network or NVR.
With a 240W total PoE budget, extended 250m PoE transmission mode, an all-metal thermal-design chassis rated to +55°C, and full CLI/web/SNMP management, it is built for demanding rack installations. This is a clearance-listed item — see the Buyer Decision Tips below before you order. Supplied through Total Security Equipment.
Key Capabilities
24 PoE Ports, 240W Total
24 Fast Ethernet PoE ports share a 240W power budget, with 2 dedicated Hi-PoE "red" ports for higher-draw devices.
Layer 2 Managed
Full CLI, web GUI, and SNMP management, plus support for Dahua's ConfigTool/iLinksView software.
Copper + Fibre Uplinks
2 Gigabit RJ45 and 2 Gigabit SFP combo ports let you uplink over copper or fibre depending on your site.
Extended 250m PoE Mode
Long-range transmission mode extends usable PoE cable runs beyond the standard 100m limit for spread-out camera sites.
Best For
Large CCTV Installations
Powers up to 24 IP cameras directly, with Hi-PoE headroom for PTZ or heater-equipped cameras.
Managed Network Environments
Full CLI/web/SNMP control suits installers who need VLANs, monitoring, or centralised management.
Spread-Out Camera Sites
Extended 250m PoE mode suits sites where cameras sit further from the switch than standard cable runs allow.
Why Choose This Switch
Large camera and access-control jobs need real port count, real PoE headroom, and management features that let you keep an eye on the network. The Dahua PFS4226-24ET-240 gives you 24 PoE ports, a 240W power budget with 2 Hi-PoE ports for demanding devices, flexible copper/fibre uplinks, and full Layer 2 management in a rugged all-metal 1U rackmount case. Available from Total Security Equipment while clearance stock lasts.
Buyer Decision Tips
Key Features & Technical Specifications
| Model SKU | PFS4226-24ET-240 |
| Brand | Dahua |
| Ports | 24 × 10/100Mbps RJ45 PoE ports + 2 × Gigabit RJ45 / 2 × Gigabit SFP combo uplink ports (28 ports total) |
| PoE Standard | IEEE 802.3af/at on standard ports; Hi-PoE on 2 dedicated ports (802.3bt on newer-revision boards) |
| PoE Power Budget | 240W total; up to 30W on standard ports, up to 90W on the 2 Hi-PoE ports (60W on earlier hardware revisions — confirm with our team) |
| Switching Capacity | 8.8Gbps |
| Forwarding Rate | 6.55Mpps |
| MAC Address Table | 4K entries |
| Packet Buffer | 2.75Mbit |
| Management | Layer 2 managed — CLI, web GUI, SNMP, and Dahua ConfigTool/iLinksView software support |
| PoE Distance | Up to 250m in extended PoE transmission mode |
| Power Supply | Internal power supply, 100-240VAC input, ≈10W idle draw, up to 240W at full PoE load |
| Surge Protection | 4kV common-mode / 2kV differential-mode |
| Design | All-metal 1U rackmount case, low-power thermal design; no fan noted by the manufacturer |
| Operating Temperature | -10°C to +55°C, 10-90% RH |
| Dimensions | 440mm × 300mm × 44mm, 1U rackmount |
| Weight | ≈3.51kg |
| Model Status | Discontinued by Dahua, superseded by PFS4226-24ET-360 — this listing is clearance stock |
| Warranty | Not published for this clearance listing — confirm current warranty term with our team |
Ideal Use Cases
Multi-Camera CCTV Installs
Powers up to 24 IP cameras from one rackmount unit, with Hi-PoE headroom for PTZ cameras.
Managed Network Sites
CLI/web/SNMP management suits installers who need VLANs and remote monitoring.
Extended-Distance Camera Runs
Extended 250m PoE mode suits large sites where cameras sit further from the comms cabinet.
Budget-Conscious Rack Upgrades
Clearance pricing on a proven managed switch for cost-sensitive expansion or replacement jobs.
FAQs
1. How many ports supply PoE power?
24 of the 28 ports supply PoE, including 2 dedicated Hi-PoE ports for higher-draw devices. The remaining 4 are Gigabit copper/SFP combo uplink ports.
2. Is this switch managed or unmanaged?
It's a full Layer 2 managed switch with CLI, web GUI, and SNMP support, plus compatibility with Dahua's ConfigTool/iLinksView software.
3. Why is this listed as clearance?
Dahua has discontinued this exact model and replaced it with the PFS4226-24ET-360. We're clearing remaining stock at a reduced price — confirm quantity available with our team before ordering.
4. What's the maximum PoE wattage per port?
Standard ports support up to 30W (802.3af/at). The 2 dedicated Hi-PoE ports support up to 90W on newer hardware revisions, or 60W on earlier revisions — ask our team to confirm the revision in current stock if this matters for your camera.
5. Where can I buy this switch in Australia?
It's available directly from Total Security Equipment — confirm current clearance stock and delivery timing with our team.
Additional Information
Melbourne HQ
26 Davies Ave., Sunshine North, VIC 3020
03 9079 5566
Sydney Branch
38 Lisbon St., Fairfield East, NSW 2165
02 8722 0348
Ordering & Support
- Australia-wide shipping
- Trade accounts and volume pricing
- Phone support on PoE budgeting & camera counts
- Download Spec Sheet
